Mærker: Siva
Mærker: Prunus
Mærker: Import Solar Radioer
Mærker: Acta Berg
Light Weight construction with common connector for both bands with very handy boom length of about 4.4 meter. Does not need guy rope support for stationary use. Because of quality construction with easy assembling, this antenna is suitable for portable use and two band contesting with one transceiver. Two or four antennas in stack are very efficient for competitions and EME communications. Easy Moon Bounce on single call and on both bands.
| Electrical Specifications 2 meter | |
| Frequency Range: | 144 – 146 MHz |
| Free Space Forward Gain: | 13.5 dBi |
| Front to Back Ratio: | 27 dB |
| 3 dB Horizontal Beamwidth: | 39.8° |
| Polarization: | Horizontal |
| Nominal Input Impedance: | 50 Ohms |
| SWR Across Entire Band: | < 1.2 |
| Maximum Power Input: | 1000 W |
| Matching Method: | Voltage Balun |
| Connector: | “N” (Common connector for both bands) |
| Mechanical Specifications 2 meter | |
| Number of Elements: | 9 |
| Element Diameter: | 8 mm Aluminum tube |
| Dipole Diameter: | 8 mm Hard Copper tube plastic coated. |
| Longest Element: | 1030 mm |
| Element Mounting Position: | Below the Boom |
| Balun and Connector: | Included |
| Electrical Specifications 70 cm | |
| Frequency Range: | 432 – 434 MHz |
| Free Space Forward Gain: | 16.9 dBi |
| Front to Back Ratio: | 28 dB |
| 3 dB Horizontal Beam width: | 21.2° |
| Polarization: | Horizontal |
| Nominal Input Impedance: | 50 Ohms |
| Maximum Power Input: | 750 W |
| Matching Method: | Voltage Balun |
| Connector: | “N” (Common connector for both bands) |
| Mechanical Specifications 70 cm | |
| Number of Elements: | 20+1 |
| Element Diameter: | 4 mm Aluminum rod and 8 mm Al tube |
| Dipole Diameter: | 8 mm Hard Copper tube plastic coated |
| Longest Element: | 350 mm |
| Element Mounting Position: | Below the Boom |
| Balun and Connector: | Included |
| Common Mechanical Specifications | |
| Boom Length: | 4.35 m |
| Boom Size: | Tapered Boom 20×20, 30×30, 20x20mm |
| Number of Boom Pieces: | 4 |
| Guy Rope Support: | Not Necessary (by order) |
| Mounting Mast Diameter: | 43 – 70 mm 1-11/16″ – 2-3/4″ OD |
| Survival Wind Speed: | 150 km/h |
| Wind Load: | 0.12m2 |
| Transportation Length: | 1.2 m |
| Net Weight: | 4.6 kg |
| Gross Weight: | 5.6 kg |
Antenna have been calculated using state of the art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns and connectors. The performance of the antenna designed using these techniques are exceptional, far better than any antennas designed using “wire” programs like EZNEC Pro/4 – NEC v4.2 or NEC v5.0, 4NEC2, MMANA or AO.
Dual Band 144 MHz and 432 MHz Yagi antenna with single connector for both bands PA144-432-29-4.5AP 2 meter top-level Azimuth Radiation Pattern achieved with careful design and optimization.
Dual Band Light Weight 2m and 70cm Yagi with single connector for both bands PA144-432-29-4.5AP Bracket and Label View
70 cm Azimuth Radiation Pattern achieved with state of the art full 3D Electromagnetic Simulation Software. Common connector.
By order guy rope support. Useful on the places with extreme wind or snow.
Dual Band 2 m and 70 cm Yagi antenna common connector PA144-432-29-4.5AP EME power appearance
How to lead coaxial cable on this light weight dual band antenna is showed on picture. Coaxial cable does not need additional support.
Duoband 2 meter and 70 cm Yagi Antenna with common (single) connector. Dipole Balun and Connector View PA144-432-29-4.5AP
Produktinformation
Din vurderings anerkendelse kan ikke sendes
Rapporter kommentarer
Rapport sendt
Din rapport kan ikke sendes
Skriv din anbefaling
Vurdering sendt
Din vurdering kan ikke sendes
Mærker: Antennas-Amplifiers
Mærker: Antennas-Amplifiers
Mærker: Antennas-Amplifiers
Dual Band antenne 9/20 elm, 4.35m
check_circle
check_circle
