The Yaesu FTM-300DE provides stable and reliable 50W RF power output. As in recent YAESU mobile transceivers, the FTM-300DE is also equipped with a heavy-duty heat sink that includes our exclusive FACC (Funnel Air-Convection Conductor – Wind Tunnel). Real Dual Band Operation (V+V, U+U, V+U, U+V) is available with two independent receivers, and the FTM-300DE supports simultaneous C4FM digital monitoring for both the A and B bands.
High-resolution display
A 2-inch High-Resolution QVGA Full-Color TFT Display clearly highlights the frequency and operation bands.
Memory Channel Band Auto Grouping
Memory Channel Band Auto Grouping (MBAG) is one of the advanced features of the FTM-300DE. Memory channels are automatically categorized in each band, and memory channels can be easily and quickly recalled by 4 Band Groups - Airband(M-AIR), VHF(M-VHF), UHF(M-UHF) and 174-400MHz/ 480-999.99MHz (M-GEN).
Clear audio
3W audio power speaker ensures a clear and crisp audio – that has been specifically tuned for quality audio. Two individual external speaker jacks are provided. Users can output the VFO A and B band Receiver to separate speakers or mix A and B signals when a single external speaker is used.
Bluetooth support
Built-in Bluetooth unit is installed in the FTM-300DE. This enables the hands-free operation with the Yaesu SSM-BT10 or a commercially available product. The SSM-BT10 is equipped with a PTT button and also supports VOX operation. Using the new USB charger cable – SCU-41 with the controller of the FTM-300DE, the SSM-BT10 can be easily charged. The SSM-BT10 works for approximately 20 hours on single charge.
WiRES-X
The FTM-300DE supports both the WiRES-X Portable Digital Node function and Fixed Node function with the HRI-200. Since simultaneous C4FM monitoring on both VFO A and VFO B is possible, users can enjoy both WiRES-X communications on one channel while monitoring another local channel at the same time.
Frequency Range
|
TX 144 – 148 MHz or 144 – 146 MHz 430 – 450 MHz or 430 – 440 MHz (Depends on the transceiver version) RX 108 – 137 MHz (AIR Band) 137 – 174 MHz (144 MHz HAM / VHF Band) 174 – 400 MHz (GEN) 400 – 480 MHz (430 MHz HAM / UHF Band) 480 – 999.99 MHz (GEN) (USA Cellular Blocked)
|
Channel Steps
|
5 / 6.25 / 8.33 / 10 / 12.5 / 15 / 20 / 25 / 50 / 100 kHz (8.33 kHz:only for Air band)
|
Mode of Emission
|
F1D, F2D, F3E, F7W
|
Frequency Stability
|
± 2.5 ppm -20 °C to +60 °C
|
Antenna Impedance
|
50 Ω
|
Supply Voltage
|
Nominal 13.8 V DC, negative ground
|
Current Consumption (approx.)
|
0.5 A (Receive) 11 A (50 W TX, 144 MHz) 11 A (50 W TX, 430 MHz)
|
Operating Temperature Range
|
-20 °C to +60 °C
|
Case Size (W x H x D)
|
Radio unit 139 x 42 x 132 mm (w/o Fan) Controller 139 x 53 x 18 mm (w/o Knob)
|
Weight (approx.)
|
1.1 kg (with Radio Unit, Controller, Control Cable)
|
Transmitter
|
|
RF Power Output
|
50 W / 25 W / 5 W
|
Modulation Type
|
F1D, F2D, F3E:Variable Reactance Modulation F7W:4FSK (C4FM)
|
Maximum Deviation
|
± 5 kHz
|
Spurious Emission
|
At least 60 dB below
|
Microphone Impedance
|
2 kΩ
|
DATA Jack Impedance
|
10 kΩ
|
Receiver
|
|
Circuit Type
|
Double-Conversion Super heterodyne
|
Intermediate Frequency
|
1st:58.05 MHz, 2nd:450 kHz (A band) 1st:57.15 MHz, 2nd:450 kHz (B band)
|
Sensitivity
|
0.8μV TYP for 10dB SN (108 – 137MHz, @AM) 0.2μV for 12dB SINAD (137 – 140MHz, @FM) 0.2μV for 12dB SINAD (140 – 150MHz, @FM) 0.25μV for 12dB SINAD (150 – 174MHz, @FM) 0.3μV TYP for 12dB SINAD (174 – 222MHz,@FM) 0.25μV TYP for 12dB SINAD (222 – 300MHz, @FM) 0.8μV TYP for 10dB SINAD (300 – 336MHz, @AM) 0.25μV for 12dB SINAD (336 – 420 MHz,@FM) 0.2μV for 12dB SINAD (420 – 470 MHz, @FM) 0.2μV for 12dB SINAD (470 – 520MHz, @FM) 0.4μV TYP for 12dB SINAD (800 – 900MHz, @FM) 0.8μV TYP for 12dB SINAD (900 – 999.99MHz, @FM) 0.19μV TYP for BER 1% (Digital Mode) Cellular Blocked (USA only)
|
Selectivity (-6 dB/-60 dB)
|
NFM, AM 12 kHz / 30 kHz
|
AF Output
|
3 W (8 Ω, THD10%, 13.8 V) Internal Speaker 3 W (8 Ω, THD10%, 13.8 V) External Speaker
|
AF Output Impedance
|
8 Ω
|
Strength of secondary radio waves
|
4 nW and below
|
Bluetooth
|
|
Version
|
Version 4.2
|
Class
|
Class 2
|
Output Power
|
2 dBm
|
