Brand: Siva
Brand: Prunus
Brand: Acta Berg
The new Yaesu FTM-300DE is a dual band digital mobile transceiver with 50W power and can be used on the C4FM/FM 144/430MHz frequency.
Stable 50 Watt Output
The Yaesu FTM-300DE provides stable and reliable 50W RF power output. As in recent YAESU mobile transceivers, the FTM-300DE is also equipped with a heavy-duty heat sink that includes our exclusive FACC (Funnel Air-Convection Conductor – Wind Tunnel). Real Dual Band Operation (V+V, U+U, V+U, U+V) is available with two independent receivers, and the FTM-300DE supports simultaneous C4FM digital monitoring for both the A and B bands.
High-resolution display
A 2-inch High-Resolution QVGA Full-Color TFT Display clearly highlights the frequency and operation bands.
Memory Channel Band Auto Grouping
Memory Channel Band Auto Grouping (MBAG) is one of the advanced features of the FTM-300DE. Memory channels are automatically categorized in each band, and memory channels can be easily and quickly recalled by 4 Band Groups - Airband(M-AIR), VHF(M-VHF), UHF(M-UHF) and 174-400MHz/ 480-999.99MHz (M-GEN).
Clear audio
3W audio power speaker ensures a clear and crisp audio – that has been specifically tuned for quality audio. Two individual external speaker jacks are provided. Users can output the VFO A and B band Receiver to separate speakers or mix A and B signals when a single external speaker is used.
Bluetooth support
Built-in Bluetooth unit is installed in the FTM-300DE. This enables the hands-free operation with the Yaesu SSM-BT10 or a commercially available product. The SSM-BT10 is equipped with a PTT button and also supports VOX operation. Using the new USB charger cable – SCU-41 with the controller of the FTM-300DE, the SSM-BT10 can be easily charged. The SSM-BT10 works for approximately 20 hours on single charge.
WiRES-X
The FTM-300DE supports both the WiRES-X Portable Digital Node function and Fixed Node function with the HRI-200. Since simultaneous C4FM monitoring on both VFO A and VFO B is possible, users can enjoy both WiRES-X communications on one channel while monitoring another local channel at the same time.
Frequency Range |
TX 144 – 148 MHz or 144 – 146 MHz 430 – 450 MHz or 430 – 440 MHz (Depends on the transceiver version) RX 108 – 137 MHz (AIR Band) 137 – 174 MHz (144 MHz HAM / VHF Band) 174 – 400 MHz (GEN) 400 – 480 MHz (430 MHz HAM / UHF Band) 480 – 999.99 MHz (GEN) (USA Cellular Blocked)
|
Channel Steps |
5 / 6.25 / 8.33 / 10 / 12.5 / 15 / 20 / 25 / 50 / 100 kHz (8.33 kHz:only for Air band)
|
Mode of Emission |
F1D, F2D, F3E, F7W
|
Frequency Stability |
± 2.5 ppm -20 °C to +60 °C
|
Antenna Impedance |
50 Ω
|
Supply Voltage |
Nominal 13.8 V DC, negative ground
|
Current Consumption (approx.) |
0.5 A (Receive) 11 A (50 W TX, 144 MHz) 11 A (50 W TX, 430 MHz)
|
Operating Temperature Range |
-20 °C to +60 °C
|
Case Size (W x H x D) |
Radio unit 139 x 42 x 132 mm (w/o Fan) Controller 139 x 53 x 18 mm (w/o Knob)
|
Weight (approx.) |
1.1 kg (with Radio Unit, Controller, Control Cable)
|
Transmitter |
|
RF Power Output |
50 W / 25 W / 5 W
|
Modulation Type |
F1D, F2D, F3E:Variable Reactance Modulation F7W:4FSK (C4FM)
|
Maximum Deviation |
± 5 kHz
|
Spurious Emission |
At least 60 dB below
|
Microphone Impedance |
2 kΩ
|
DATA Jack Impedance |
10 kΩ
|
Receiver |
|
Circuit Type |
Double-Conversion Super heterodyne
|
Intermediate Frequency |
1st:58.05 MHz, 2nd:450 kHz (A band) 1st:57.15 MHz, 2nd:450 kHz (B band)
|
Sensitivity |
0.8μV TYP for 10dB SN (108 – 137MHz, @AM) 0.2μV for 12dB SINAD (137 – 140MHz, @FM) 0.2μV for 12dB SINAD (140 – 150MHz, @FM) 0.25μV for 12dB SINAD (150 – 174MHz, @FM) 0.3μV TYP for 12dB SINAD (174 – 222MHz,@FM) 0.25μV TYP for 12dB SINAD (222 – 300MHz, @FM) 0.8μV TYP for 10dB SINAD (300 – 336MHz, @AM) 0.25μV for 12dB SINAD (336 – 420 MHz,@FM) 0.2μV for 12dB SINAD (420 – 470 MHz, @FM) 0.2μV for 12dB SINAD (470 – 520MHz, @FM) 0.4μV TYP for 12dB SINAD (800 – 900MHz, @FM) 0.8μV TYP for 12dB SINAD (900 – 999.99MHz, @FM) 0.19μV TYP for BER 1% (Digital Mode) Cellular Blocked (USA only)
|
Selectivity (-6 dB/-60 dB) |
NFM, AM 12 kHz / 30 kHz
|
AF Output |
3 W (8 Ω, THD10%, 13.8 V) Internal Speaker 3 W (8 Ω, THD10%, 13.8 V) External Speaker
|
AF Output Impedance |
8 Ω
|
Strength of secondary radio waves |
4 nW and below
|
Bluetooth |
|
Version |
Version 4.2
|
Class |
Class 2
|
Output Power |
2 dBm
|
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Brand: Alinco
Brand: Alinco
Brand: Yaesu
The new Yaesu FTM-300DE is a dual band digital mobile transceiver with 50W power and can be used on the C4FM/FM 144/430MHz frequency.
Stable 50 Watt Output
check_circle
check_circle
