Filter By

Cable type

Cable type

Categories

Categories

Band

Band

Size

Size

Colour

Colour

Brand

Brand

Condition

Condition

Price

Price

  • kr0.00 - kr33,995.00

Extras

Extras

Voltage

Voltage

Connector type

Connector type

Version

Version

Color

Color

Brand: Siva

RG 213 U /MIL-C-17F - 1m

(0)
RG 213 U /MIL-C-17F standard.  50 OHM RF COAXIAL CABLE Class CPR Eca MANUFACTURED IN COMPLIANCE WITH MIL-C-17F STANDARDS 100 meter rolls or purchase per meters. Diameter Ø 10,3 mm

Brand: Siva

RF400UF PVC ultra flex low loss

(0)
RF400UF-PVC - ultra flexible! with soft inner conductor for mounting in the mast etc. HIGH PERFORMANCE BROADBAND LOW LOSS 50 OHM COAXIAL 100 meter rolls or purchase per meters. Diameter Ø 10.3 mm

Brand: Prunus

PRUNUS J-924D 10000mAh Solar DAB+/FM/SD/BT/USB+AAA

(0)
PRUNUS J-924D 10000mAh håndsvingsradio, nødradio Solar, DAB og DAB+ FM AAA batteridrevet radio, USB-opladning, fakkel og læselys, SOS Alarm, Power Bank, Kompas til campingBluetooth, SD/TF kort afspilning.Super lækker radio der har det hele.
All best sellers
Active filters

Brand: SSB-Electronic

SSB DCW 2004 B Sequencer

(0)
The Bias-T incl. Sequencer, DCW 2004 B, allows a comfortable remote coupling of our MHP - R and SUPER - AMP preamplifiers via the coaxial cable as well as for delayed switching of HF-linear amplifiers.

Brand: Vero

Vero VR-P25D UHF 30W

(0)
The Vero VR-P25D UHF amplifier is a portable, lightweight, wide coverage RF power amplifier for handheld radio equipment and are equally capable of amplifying both analog and digital signals. With an input power of 2-6 Watts, up to 30 Watts of output power can be achieved.

Brand: Antennas-Amplifiers

6m 6elements DX Yagi 6m6DXD

(0)
Higher Gain 6m 6elements DX Yagi 6m6DXD Low Noise higher gain 6m 6elements DX Yagi 6m6DXD will make sure you can hear very weak signals and give you the extra edge you need in contests or enjoy DXing. New Es season has arrived. This 6 Elements 50 MHz Yagi antenna provides stunning performance across the 50 – 50.5 MHz DX band. The old name of the antenna...

Brand: Antennas-Amplifiers

6m 5elements Antenna 6m5DX

(0)
Number of Elements: 5 Tapered elements. Center tube 12mm, extensions 10 and 8mmTapered dipole. Center tube 12mm, extensions 10 and 8mmBalun and Connector: Included Longest Element: 3.1 meterElement Mounting Position: Below the boomBoom Length: 4.3 meterTapered boom. 40x40mm, 30x30mmTurning Radius: 2.6 meterNumber of Boom Pieces: 3Guy rope support: Not...

Brand: Antennas-Amplifiers

6m 3elements Antenna 6m3DX

(0)
6m 3elements Antenna 6m3DX for DXing and Portable Perfect 6m 3elements Antenna 6m3DX to put in a car for portable. Good as a stationary antenna. Relative short boom will produce a wide azimuth radiation pattern. No need to turn the antenna all the time in certain directions. The old name of the antenna was PA50-3-1.5B

Brand: Antennas-Amplifiers

6m 7elements DX Contest Antenna 6m7DXP

(0)
Boom Length: 8.68 meterTapered Boom: 40x40mm, 30x30mm, 20x20mmNumber of Boom Pieces: 7Turning Radius: 5 meterGuy rope support: Yes, includedMounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ ODClamp: 2 x M8 Stainless SteelSurface Area: 0.34m2Survival Wind Speed: 150km/hNet Weight: 12.5 kgGross Weight: 14 kgTransportation Length: 1.49 meter For extra...

Brand: Antennas-Amplifiers

Bias-T guide and diagrams

(0)
A “Bias-Tee” also known as a “DC Inserter” is a simple way to feed DC power through coaxial cable to the remote device such as a pre-amplifier and – or transmit/receive relays via the coaxial cable. The main task is to inject DC into or extract DC current from the coaxial cable, leaving the RF signal undisturbed. A bias tee is a passive RF circuit...

Brand: RigExpert

RigExpert - AA-650 ZOOM - 100 kHz-650 MHz

(0)
The RigExpert Stick XPro is an antenna and cable vector analyzer. The analyzer allows you to measure various parameters of antennas, cables, lines, filters and many others in the frequency range from 100 kHz to 1000 MHz.

Brand: Grazioli

Grazioli - HW10V

(0)
1/2 λ vertical antenna fed at the base, tunable from 26 to 30 MHz by adjusting the whip length and fine-tuning at the base by means of a PTFE insulated high voltage variable capacitor (40 kV) Extremely robust construction in AW6063-T66 aluminum alloy and CNC machined parts from solid stock. Supplied with high-quality 304 and 316 stainless steel fasteners...

Brand: K-PO

SPS-30-II 13,8V/30A

(0)
The K-PO SPS-30-II is a power supply equipped with 2 analogue meters (Volt and ampère). The SPS-30-II can be used for equipment till 30A continuous and 35A short.

Follow us on Facebook