Superstar 3900 (2023 version)

Update: you can now deactivate and activate the beep tone directly from the menu without programming software.

In 2023, the new Super Star 3900 comes with some improvements, such as: display with function indicator and screen lighting adjustment, new handheld microphone with channel change buttons (Up/Down), new board design with micro components which translates into a reduction in the overall weight: improvements that in no way alter its essence and that make the Super Star 3900 remain stronger than ever as an icon of the citizen band radio.

Powertest - UPDATE ! - see the actual output of this radio in export version:

Export version power PEP (PEAK MAX ON DUMMYLOAD): FM: 12-14W AM:25-30W / SSB:40-45W / 25.615 - 28.315 MHz

Features

Modulation: AM / FM / LSB / USB

Multi-bands: Yes

Output power: AM/FM: 4 Watt / SSB: 12 Watt

Channels: 40 AM / FM

Display type: Multi-color backlight

Display colors: Red

VOX Function: Yes

Noise blanker: Yes

Squelch: Automatic squelch / Manual squelch /

Scan function: Yes

Memory channels: Yes

External speaker socket: Yes

External S-meter socket: Yes

External PA socket: Yes

S-meter: Yes

MIC gain: Yes

RF gain: Yes

TOT (time out timer): Yes

Dual watch: Yes

RX Noise reduction: Yes

TX Noise reduction: Yes

Electrical data

Voltage: 13,8 Volt

Frequency stability: ± 5 ppm

Fuse: 10A (250 Volt)

Operating temperature: -20° to +55° C

Frequency control: PLL synthesizer

Operating mode: F3E (FM) / A3E (AM) / J3E (SSB)

Transmitter

Audio frequency response: 450 Hz - 2.5 kHz

Current: 5 A

Distortion: <10%

Receiver

Frequency response: 300 Hz - 2.8 kHz

Maximum audio power: 3 Watt

Internal speaker: 8 Ohm, round

SSB sensitivity: 0.25 µV for 10 dB (S+N)/N at greater than 1/2 Watt of audio output.

AM sensitivity: 1.0 µV for 10 dB (S+N)/N at greater than 1/2 Watt of audio output.

Mechanical data

Length: 287 mm

Height: 61 mm

Width: 200 mm

Weight: 1500 gram

Antenna connector: UHF (PL) female (SO-239)

Inside the box

Transceiver: 1 pcs

Microphone: 1 pcs

Fixing screws: 1 set

Mounting bracket: 1 pcs

Power lead: 1 pcs