- Radios
- Antennas
- Baluns/Antenna parts
- Hamradio
- Power Amplifiers
- CB Radio
- Prepping
- Scannere
- DVNoder/ADSB/Meshtastic/Arduino/PI
- Marine
- Autotilbehør
- Radio Sonde
- Components
- Gift voucher
- Backuppower/Inverters/Reducers
- DECT intercom
Brand: Siva
RG 213 U /MIL-C-17F - 1m
RG 213 U /MIL-C-17F standard.
50 OHM RF COAXIAL CABLE Class CPR Eca
MANUFACTURED IN COMPLIANCE WITH MIL-C-17F STANDARDS
100 meter rolls or purchase per meters. Diameter Ø 10,3 mm
Brand: Siva
RF400UF PVC ultra flex low loss
RF400UF-PVC - ultra flexible! with soft inner conductor for mounting in the mast etc.
HIGH PERFORMANCE BROADBAND LOW LOSS 50 OHM COAXIAL
100 meter rolls or purchase per meters. Diameter Ø 10.3 mm
Brand: Prunus
PRUNUS J-924D 10000mAh Solar DAB+/FM/SD/BT/USB+AAA
PRUNUS J-924D 10000mAh håndsvingsradio, nødradio Solar, DAB og DAB+ FM AAA batteridrevet radio, USB-opladning, fakkel og læselys, SOS Alarm, Power Bank, Kompas til campingBluetooth, SD/TF kort afspilning.Super lækker radio der har det hele.
Brand: Import Solar Radioer
12000maH, AM/FM bærbar USB radio
12000mAh solradio, håndsving radio, bærbar nødradio Dynamo-radio med AM/FM, med genopladelig powerbank, LED-læselampe, kompas, SOS-alarm til camping dør nødsituation
Brand: Prunus
Prunus J-369 Emg Radio AM/FM Solar/Hand Crank
Emergency Radio AM/FM Portable Radio Solar Hand Crank USB AA Batteries Rechargeable Torch Reading Lamp SOS Alarm for Emergencies
432MHz 70cm 1200 W Bias Tee
What’s a Bias Tee?
A “Bias-Tee” also known as a “DC Inserter” is a simple way to feed DC power through coaxial cable to the remote device such as a pre-amplifier and – or transmit/receive relays via the coaxial cable.
The main task is to inject DC into or extract DC current from the coaxial cable, leaving the RF signal undisturbed.
A bias tee is a passive RF circuit consisting of capacitors and inductors. Act as a diplexer by combining DC and RF signals onto a common port RF+DC.
Description
Best-in-class electrical performance:
Frequency Range: 400 – 500 MHz
Maximum Power at SWR 1:1 1200W
Insertion loss: 0.01dB
Input Return Loss: -35 dB
Isolation RF port to DC port: 80 dB
DC resistance from DC to RF: 0.15 Ω
Supply Voltage: 30V
Supply Current: 1A
Connectors “N”
Permanent damage may occur if any of these limits are exceeded.
70 cm 1200 W Ultimate High Power Bias-Tee 430-450 MHz Measured extreme high DC-RF isolation 80 dB that minimizes RF signal leakage and interference with other devices.
70 cm Bias Tee 430 – 450 MHz High Power 1200 W Measured Super Low Loss Insertion Loss and excellent Return Loss
The recommended position of 70 cm outdoor Bias-Tee is at the end of the coaxial cable to pass DC power to the remote device.
Inject DC into Coaxial cable.
Extracts DC from Coaxial cable.
400 -500 MHz 70 cm 1200 W Ultimate Bias Tee Outdoor Mounting appearance
Product Details
Comments (0)
Grade
No customer reviews for the moment.
5 other products in the same category:
Brand: Antennas-Amplifiers
Bias-T guide and diagrams
A “Bias-Tee” also known as a “DC Inserter” is a simple way to feed DC power through coaxial cable to the remote device such as a pre-amplifier and – or transmit/receive relays via the coaxial cable.
The main task is to inject DC into or extract DC current from the coaxial cable, leaving the RF signal undisturbed.
A bias tee is a passive RF circuit...
Brand: Antennas-Amplifiers
2m Bias Tee 1500W 144 – 148 MHz
What’s a Bias Tee?
A “Bias-Tee” also known as a “DC Inserter” is a simple way to feed DC power through coaxial cable to the remote device such as a pre-amplifier and – or transmit/receive relays via the coaxial cable.
The main task is to inject DC into or extract DC current from the coaxial cable, leaving the RF signal undisturbed.
A bias tee is a passive...
Brand: SSB-Electronic
SSB DCW 2004 B Sequencer
The Bias-T incl. Sequencer, DCW 2004 B, allows a comfortable remote coupling of our
MHP - R and SUPER - AMP preamplifiers via the coaxial cable as well as for delayed
switching of HF-linear amplifiers.
Brand: Antennas-Amplifiers
2m Bias Tee 1500W 144 – 148 MHz
What’s a Bias Tee?A “Bias-Tee” also known as a “DC Inserter” is a simple way to feed DC power through coaxial cable to the remote device such as a pre-amplifier and – or transmit/receive relays via the coaxial cable.The main task is to inject DC into or extract DC current from the coaxial cable, leaving the RF signal undisturbed.A bias tee is a passive RF...
Brand: Antennas-Amplifiers
1296MHz 23cm 600 W Bias Tee
A “Bias-Tee” also known as a “DC Inserter” is a simple way to feed DC power through coaxial cable to the remote device such as a pre-amplifier and – or transmit/receive relays via the coaxial cable.
The main task is to inject DC into or extract DC current from the coaxial cable, leaving the RF signal undisturbed.
A bias tee is a passive RF circuit...
What’s a Bias Tee?
A “Bias-Tee” also known as a “DC Inserter” is a simple way to feed DC power through coaxial cable to the remote device such as a pre-amplifier and – or transmit/receive relays via the coaxial cable.
The main task is to inject DC into or extract DC current from the coaxial cable, leaving the RF signal undisturbed.
A bias tee is a passive RF circuit consisting of capacitors and inductors. Act as a diplexer by combining DC and RF signals onto a common port RF+DC.