Home

80m 1500W Inverted “V” dipole antenna CW/SSB with relay switches

(0)

80m Inverted “V” dipole antenna CW/SSB with relay switchesVery low SWR on CW part of 80m band and SSB part with easy switching.– Resonance at 3.535 MHz– Resonance at 3.76 MHz achieved with relays– High-quality common mode balun– Relay switching– Connector SO239– Max power input 1500W

More

Brand: Antennas-Amplifiers

80m 3500W Inverted “V” dipole antenna CW/SSB with relay switches

(0)

80m 3500W Inverted “V” dipole antenna CW/SSB with relay switches– Resonance at 3.535MHz– Resonance at 3.76MHz achieved with 32A relays– High-quality common mode balun with Teflon cable– Double relay switching– Connector SO239.– Max power input 3500 W.

More

Brand: HanRongDa

HanRongDa HRD-A320 (am/fm - mw/sw/air/vhf)

(0)

The HanRongDa HRD-A320 is a new compact multi-band world receiver with many great features.It can be fully controlled by a free downloadable Android APP or used the traditional way by turning and pushing the control buttons.Besides multi-band reception of FM, VHF, MW, SW and Airband it can also be used as Bluetooth speaker, TF card player and as external...

More

Brand: Antennas-Amplifiers

2m Bias Tee 1500W 144 – 148 MHz

(0)

What’s a Bias Tee?A “Bias-Tee” also known as a “DC Inserter” is a simple way to feed DC power through coaxial cable to the remote device such as a pre-amplifier and – or transmit/receive relays via the coaxial cable.The main task is to inject DC into or extract DC current from the coaxial cable, leaving the RF signal undisturbed.A bias tee is a passive RF...

More

Brand: RigExpert

Shackmaster Power 500

(0)

The new Shackmaster brand, by RigExpert, breaks high-quality and aesthetic patterns, raising them to its own. The first representative of the high-end class from Shackmaster, the Compact Desktop Power Supply Power 500, is now available

More

Brand: Antennas-Amplifiers

23 cm Antenna PA1296-36-3AUT

(0)

Last one! 23cm36DXAP (PA1296-36-3AUT) 1290-1310 36el 292cm 300W Transportation length 1.2m 1296 MHz Contest and EME Stationary Super Yagi Antenna PA1296-36-3AUT Now holds the current VK National record on 1296 at 2458 km.

More

Brand: Antennas-Amplifiers

430-450MHz 1200W Low Noise Preamplifier

(0)

A Complete Solution for 430-450 MHz 1200 W Transmit-Receive 70 cm Competitions and Moon Bounce EME2-432Vælg mellem normal version (N-connector)/7/16" version/udendørs version (N/ 7/16")

More

Brand: RigExpert

RigExpert - AA-2000 ZOOM - 100 kHz-2000 MHz

(0)

The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 2000 MHz.

More

Brand: RigExpert

RigExpert - AA-1500 ZOOM - 100 kHz-1500 MHz

(0)

The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 1500 MHz.

More

Brand: RigExpert

RigExpert - Stick XPro - range 100 kHz-1000 MHz

(0)

The RigExpert Stick XPro is an antenna and cable vector analyzer. The analyzer allows you to measure various parameters of antennas, cables, lines, filters and many others in the frequency range from 100 kHz to 1000 MHz.

More

Brand: RigExpert

RigExpert Stick 230

(0)

The RigExpert Stick 230 analyzer is designed for measuring SWR (standing wave ratio), return loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.

More

Brand: RigExpert

RigExpert Stick 500

(0)

The RigExpert Stick 500 analyzer became the third member of the Stick family that is well known to connoisseurs of high technology and the incredible comfort of using. No matter the time, place, or weather. Range 0,1 MHz to 500 MHz.

More

Brand: Antennas-Amplifiers

1296MHz 23cm 600 W Bias Tee

(0)

A “Bias-Tee” also known as a “DC Inserter” is a simple way to feed DC power through coaxial cable to the remote device such as a pre-amplifier and – or transmit/receive relays via the coaxial cable. The main task is to inject DC into or extract DC current from the coaxial cable, leaving the RF signal undisturbed. A bias tee is a passive RF circuit...

More

Brand: Antennas-Amplifiers

2m Bias Tee 1500W 144 – 148 MHz

(0)

What’s a Bias Tee? A “Bias-Tee” also known as a “DC Inserter” is a simple way to feed DC power through coaxial cable to the remote device such as a pre-amplifier and – or transmit/receive relays via the coaxial cable. The main task is to inject DC into or extract DC current from the coaxial cable, leaving the RF signal undisturbed. A bias tee is a passive...

More

Brand: Antennas-Amplifiers

432MHz 70cm 1200 W Bias Tee

(0)

What’s a Bias Tee?A “Bias-Tee” also known as a “DC Inserter” is a simple way to feed DC power through coaxial cable to the remote device such as a pre-amplifier and – or transmit/receive relays via the coaxial cable.The main task is to inject DC into or extract DC current from the coaxial cable, leaving the RF signal undisturbed.A bias tee is a passive RF...

More

Brand: Antennas-Amplifiers

144/432MHz Dual Divider 2-Way “N” Con 1/4 wl

(0)

144 /432 MHz Power Divider 2 way with “N” Connectors , 1/4 wl 0.25 wave length.This model works with the dual band antennas. Works with both bands.*note! if your dual band antennas has two separate connectors, you would need two of theese sets for combining two antennas. One for each band, total of 4 coax cables. This divider has been tested and improved...

More

Home

Follow us on Facebook