Home

President Washington - 80W PEP AM/USB/LSB+50WFM

(0)

The new President Washington is your ultimate 40 channel AM/FM/USB/LSB transceiver. The radio has 80W PEP (AM/USB/LSB) and 50W (FM). The Washington comes with 38 CTCSS tones and 104 DCS codes, ensuring your conversations remain private and interference-free. Besides that there are many other interesting features which makes the Washington one of the most...

More

Brand: President-Electronics

TTI - TCB-H100E

(0)

The TTI TCB-H100E is the new compact handheld CB radio from TTI with ECHO function, VOX function, 3 display colors, 2600 mAh battery pack and many more functions. Optional are a 12/24 volt car charger and a 12/24 volt battery eliminator with external antenna connector.Frequency range:26.965 - 27.405 MHz

More

Brand: President-Electronics

President Lincoln II+ (V3)

(0)

The latest version of the Lincoln II is called the Lincoln II+ V3 and now covers the 12m band as well as 10m. The other biggest change is that this new version is now PC programmable, using the mini USB socket on the rear, allowing you to change various features on the radio. The power output has also been increased slightly. Frequency range:24.890 -...

More

Brand: President-Electronics

President - Himalaya WB

(0)

The Himayala WB is a fixed antenna, specially de-signed to give maximum results in the CB channel band, 10 and 12 meter band. A standard socket UHF/SO-239 is used for the connection of the antennaFrequency range:22 - 30 MHz

More

Brand: President-Electronics

President George II ASC

(0)

The PRESIDENT GEORGE II is a CB 27 Mhz citizen band radio with AM, FM and Upper Sideband with advanced features for the most demanding users. Export version 24.715 - 30.105 AM: 12,5W / FM: 35W / SSB: 35W

More

Brand: President-Electronics

President MC KINLEY

(0)

Export version gives you the modes AM FM USB LSB, 20 Watt FM/12 Watt AM SSB Write a comment in checkout if you want standard or export version.

More

Brand: President-Electronics

President Richard

(0)

The President Richard is a amateur radio HF mobile transceiver. The Radio is suitable for the 10M amateur band frequency from 28.000 to 29.700 MHz. The EXPORT version would cover 24-30MHz.

More

Brand: Antennas-Amplifiers

80m 1500W Inverted “V” dipole antenna CW/SSB with relay switches

(0)

80m Inverted “V” dipole antenna CW/SSB with relay switchesVery low SWR on CW part of 80m band and SSB part with easy switching.– Resonance at 3.535 MHz– Resonance at 3.76 MHz achieved with relays– High-quality common mode balun– Relay switching– Connector SO239– Max power input 1500W

More

Brand: Antennas-Amplifiers

80m 3500W Inverted “V” dipole antenna CW/SSB with relay switches

(0)

80m 3500W Inverted “V” dipole antenna CW/SSB with relay switches– Resonance at 3.535MHz– Resonance at 3.76MHz achieved with 32A relays– High-quality common mode balun with Teflon cable– Double relay switching– Connector SO239.– Max power input 3500 W.

More

Brand: Antennas-Amplifiers

2m Bias Tee 1500W 144 – 148 MHz

(0)

What’s a Bias Tee?A “Bias-Tee” also known as a “DC Inserter” is a simple way to feed DC power through coaxial cable to the remote device such as a pre-amplifier and – or transmit/receive relays via the coaxial cable.The main task is to inject DC into or extract DC current from the coaxial cable, leaving the RF signal undisturbed.A bias tee is a passive RF...

More

Brand: Antennas-Amplifiers

23 cm Antenna PA1296-36-3AUT

(0)

Last one! 23cm36DXAP (PA1296-36-3AUT) 1290-1310 36el 292cm 300W Transportation length 1.2m 1296 MHz Contest and EME Stationary Super Yagi Antenna PA1296-36-3AUT Now holds the current VK National record on 1296 at 2458 km.

More

Brand: Antennas-Amplifiers

430-450MHz 1200W Low Noise Preamplifier

(0)

A Complete Solution for 430-450 MHz 1200 W Transmit-Receive 70 cm Competitions and Moon Bounce EME2-432Vælg mellem normal version (N-connector)/7/16" version/udendørs version (N/ 7/16")

More

Brand: Antennas-Amplifiers

1296MHz 23cm 600 W Bias Tee

(0)

A “Bias-Tee” also known as a “DC Inserter” is a simple way to feed DC power through coaxial cable to the remote device such as a pre-amplifier and – or transmit/receive relays via the coaxial cable. The main task is to inject DC into or extract DC current from the coaxial cable, leaving the RF signal undisturbed. A bias tee is a passive RF circuit...

More

Brand: Antennas-Amplifiers

2m Bias Tee 1500W 144 – 148 MHz

(0)

What’s a Bias Tee? A “Bias-Tee” also known as a “DC Inserter” is a simple way to feed DC power through coaxial cable to the remote device such as a pre-amplifier and – or transmit/receive relays via the coaxial cable. The main task is to inject DC into or extract DC current from the coaxial cable, leaving the RF signal undisturbed. A bias tee is a passive...

More

Brand: Antennas-Amplifiers

432MHz 70cm 1200 W Bias Tee

(0)

What’s a Bias Tee?A “Bias-Tee” also known as a “DC Inserter” is a simple way to feed DC power through coaxial cable to the remote device such as a pre-amplifier and – or transmit/receive relays via the coaxial cable.The main task is to inject DC into or extract DC current from the coaxial cable, leaving the RF signal undisturbed.A bias tee is a passive RF...

More

Brand: Antennas-Amplifiers

144/432MHz Dual Divider 2-Way “N” Con 1/4 wl

(0)

144 /432 MHz Power Divider 2 way with “N” Connectors , 1/4 wl 0.25 wave length.This model works with the dual band antennas. Works with both bands.*note! if your dual band antennas has two separate connectors, you would need two of theese sets for combining two antennas. One for each band, total of 4 coax cables. This divider has been tested and improved...

More

Home

Follow us on Facebook